Solvents Versus Detergents
Everybody knows oil and water don’t mix. You have 2 choices to remove oils such as grease. Dissolve it off with solvents or emulsify it off with detergents.
The Bad Choice: Solvents
Solvents will remove 99% of grease. When a solvent dissolves grease off your hands, it penetrates too deep into your skin, removing your natural oils. Then it leaves a very thin sticky film of dissolved grease. Many times you need to wash again with plain soap to remove the sticky film. The oils and water will separate when they enter the drain and plumbing system. This can lead to a grease buildup and possibly clogged drains. Waterless hand cleaners are designed for use if no water is available. Water activates detergents and helps rinse after washing. By definition, all waterless hand cleaners are formulated with solvents. Our "Power Gel" hand cleaner is the only solvent based "Waterless" hand cleaner we manufacture.
The Good Choice: Detergents
Detergents also remove grease. But, through a different process called emulsification. This chemistry is easier on your skin, and you can skip the 2-step washing process. The detergents break down the oils into a stabilized emulsion. Oils are broken down into microscopic droplets called micelles, where they can’t separate and attach to your pipes. They are carried all the way to the water treatment plant.
Your "Take Away" Points to Remember
Solvents are harsh on your skin. They are usually made with mineral spirits. No, really! Look at the ingredient list. Petroleum Distillates or Alkanes are fancy names for mineral spirits.
Orange peel based products using D-Limonene are harsh solvents also.
Why do companies use these harsh products? Answer: Because they are inexpensive.
Detergent products are much better for you and your piping system.
If you don’t need to wash using any water (Waterless), it is a solvent product.
We only recommend “Waterless” products in situations where water is not available.
What is a "Waterless" Hand Cleaner?
"Waterless" means you do not need water to wash or rinse your hands. These hand cleaners are designed to be used when no water is available. Maybe your changing a tire on the highway-no water there! Or maybe your on pit row, just fixed your own car and now have to finish the race-no time to rinse now!
We get it. Sometimes you just need a "Waterless Hand Cleaner". We agree with your choice to use waterless in these special situations. We offer "Power Gel Hand Cleaner" for this reason.
Now comes the tough talk... Might sound like your mama here!
We can't understand why so many use waterless hand cleaners when water is available. Do you just enjoy dry cracked skin? By definition, ALL waterless hand cleaners are made with solvents. No amount of added lanolin or skin softeners can overcome the effect solvents have in removing your skins natural oils. Save the solvents for cleaning parts and engines, not your hands.
Most hand washing occurs in the shop or garage when water is available. We urge you to make the switch. Our detergents will get the job done and you can still live the Full Bore lifestyle with clean, not cracked, skin.
3 Forms of Energy
Chemical Energy/Physical Energy/Thermal Energy
For over 40 years, we have been perfecting the balance between 3 forms of energy to clean your hands.
Our detergents are ph balanced and concentrated to remove the toughest stains. (Chemical Energy)
Our abrasive "Scrubbers" have various sizes, shapes and textures to reach deep into fingerprints. They even change shape as you wash. Yes, our products feel very gritty. It's solvents that dry and damage your skin, not our grit. C'mon tough guy (or girl), you can handle it! (Physical Energy)
In the toughest applications, we recommend warm water to aid in cleaning. (Thermal Energy)
History of Soap
Mastering the basics is the first step to doing a good job. At Full Bore, that means knowing where soap came from - so we can make it even better. We thought we'd share a little history of soap in case you ever find yourself playing Jeopardy!
Cylinders containing boiled fats with ashes were found during excavations of Babylon that date back to 2800 B.C. This is the first known use of soap. In 1500 B.C., the Egyptians combined animal and vegetable oils with salts to form a soap product used for treating skin diseases.
During the great Roman Empire (310 B.C.), bathing rose to a new level with the building of large bathhouses. Water was supplied via aqueducts and soap was recommended for both medicinal and cleansing purposes.
The word "soap" actually got its name from Mount Sapo where the Romans routinely sacrificed animals. Rain would carry the leftover animal fat and ash down the mountain toward the Tiber River. It collected there along the clay banks, where women washed clothes - with much less effort.
Through the years since the Roman Empire, soaps have been made by many different cultures and are essential in growing, civilized societies. As population densities increased, diseases spread quickly. Around the 17th century, humans began to associate filthy compact living with disease.
Cleaning practices and products remained the same for many years, until detergents, originally known as Syndets or synthetic detegents were first developed in the 1940’s. These “man-made” soaps made life so much easier, and cleaner. It's hard to believe so many everyday products we depend on were developed just within the last 80 years.
Who knows what the next 80 years will bring, or even the next six! Whatever it is, Full Bore will be up for the challenge, making sure you have the best cleaner possible for whatever you get into. Go ahead. Get Dirty. Full Bore will get you clean.
Still Want to Learn More?
These links will help!